Construction Machinery Steel Wear Cast Steel Casting Parts

Construction Machinery Steel Wear Cast Steel Casting Parts
Details:
The sulfur content and other trace elements in ductile casting pig iron should not be too high. If the content of trace elements such as sulfur in pig iron is too high, more modulator or modulators with higher rare earth content are needed, which increases the cost of modulator.
Send Inquiry
Description
Send Inquiry

Precautions in the production of ductile casting

 

(1) The sulfur content and other trace elements in ductile casting pig iron should not be too high. If the content of trace elements such as sulfur in pig iron is too high, more modulator or modulators with higher rare earth content are needed, which increases the cost of modulator.

(2) Stability of nodular casting modularization treatment. Spheroidizing process is the key process in nodular cast iron production. Only when the nodularization process is stable, the quality of the casting can be stable. Depending on the different products and the sulfur content of hot metal, how many nodulating agents and inoculants need to be added. Job descriptions must be well written and strictly followed.
(3) Avoid long waits. Pour immediately after spheroidization. Over time, the remaining magnesium will be burned out and the inoculation will be less effective.
(4) Avoid excessive residual magnesium content. Higher residual magnesium content will increase the tendency of casting shrinkage. The residual magnesium content of ordinary ductile iron should be controlled at 0.035% ~ 0.045%, and the residual magnesium content of high nickel ductile iron should be controlled at 0.06% ~ 0.07%.

 

 

Hot Tags: construction machinery steel wear cast steel casting parts, China construction machinery steel wear cast steel casting parts manufacturers, suppliers, factory, Hardware Tools, Mining Casting Parts, Sand Casting Parts, Wear Cast Steel, Wear Resistent Steel

Send Inquiry